loading
Log in to access quotation area

If you don't have a login, click here to register
Forgot your password?


DF53/DF98

Power Supply Impedance for Fieldbus


Quotation
Downloads

These modules were specially designed to provide appropriate impedance for fieldbus networks.

  • DF53 (4 ports)
  • DF53-FC (4 ports)
  • DF98 (2 ports)

 

The purpose of this impedance is to implement an output circuit where the impedance is greater than 3 KΩ, and when assembling in parallel with two 100 Ω ±2% terminators, it results in 50 Ω line impedance approximately. This impedance can be implemented in a passive mode (50 Ω resistance in series with a 100 mH inductance) or in an active mode, through an impedance control circuit.

The fieldbus power supply impedance is a non-isolated, active impedance control device, in compliance with IEC 61158-2 standard. This device provides output impedance which, in parallel with the two bus terminators (a 100 Ω resistor in series with a 1 mF capacitor) required by the standard, results in a pure resistive line impedance for a broad frequency range. DF53 and DF98 were designed to work in non-hazardous areas.

 

Some Characteristics:

Input

24 to 32 Vdc +/- 10%

Output

DF53: 340 mA per port
DF98: 500 mA per port

Maximum power dissipated

DF53: 2.26 W per port
DF98: 3.43 W per port

Temperature

Operation: 0 to 60 ºC (32 to 140 ºF)
Storage: -30 to 70 ºC (-22 to 158 ºF)

Weight

260 g

Dimensions

39.9 x 137.0 x 141.5 mm
(1.57 x 5.39 x 5.57 in)

 



Download Area

Login to visualize
Login to visualize
Login to visualize
Login to visualize
Login to visualize
Warning: mysqli_num_rows() expects parameter 1 to be mysqli_result, boolean given in C:\Inetpub\vhosts\smar.com\httpdocs\en\products\detalhe.php on line 397
Login to visualize
Login to visualize
Login to visualize
Login to visualize
Warning: mysqli_num_rows() expects parameter 1 to be mysqli_result, boolean given in C:\Inetpub\vhosts\smar.com\httpdocs\en\products\detalhe.php on line 397
Login to visualize